Construction Manager
Reporting to the Project Manager
Reporting to the Project Manager
Responsibilities
·
Supervision and coordination of all
construction activities of the projects, from pre-planning to execution of the
project and up to turn-over of the project to the client.
·
Manages the construction allocations
and budget-manpower resources, materials, equipment and logistical provisions
for each site of the project.
·
Coordinates with Line Supervisors in
regard to the planning and execution of the projects and specifies Requirement
in the project that needs to be delegated to the concerned department.
·
Reports to the Project Manager the
progress of the construction works in all sites and provides recommendations to
customers’ concerns, inquiries and complains.
·
Ascertains effective construction
plan on the onset of the execution of the project. Develops and manages project
schedule with specific responsibility for all construction related activities,
including procurement pre-construction, deliverables, construction and
commissioning.
·
Evaluates and checks the compliance
of the execution of the construction works according to the project
requirements-approved and submitted drawings, approved suppliers, materials and
equipment and recommended manpower allocations on each site.
·
Expedite all assigned preliminary
field operations, measurement and evaluations in support of the project, design
and scope of work developments as requested by the client.
·
Liaises with Project Managers and
Site Engineers with regards to their construction related concerns and
inquiries and gives suggestions that will facilitate effective monitoring of
each project.
·
Cost monitoring of construction
resources-manpower, materials, equipment and logistical requirements.
·
Implements health and safety measures
on each site and coordinates with Safety personnel to guarantee manpower and
customer safety and welfare are being handled carefully.
·
Observes compliance of construction
always works according to the approved program of work and laws of the State
and maintain safe working standards on site.
·
Preparation of method statement for
all project’s activities on site.
Qualifications
·
Bachelor’s Degree in Civil or
Mechanical Engineering from a recognized university
·
Minimum of 10-15 years’ experience in
a related field.
·
Proficient in MS Project and AutoCAD
·
Must be a valid member of a relevant
professional body.
Civil & Structural Engineer
Reporting
to the Construction Manager
Responsibilities
·
Function as technical coordinator and
supervisor on engineering projects.
·
Function as Trade Chief Inspector on
engineering projects and report findings to superior daily.
·
Engineering knowledge to interpret,
implement, coordinate, construction documents, layouts, drawings, technical specifications.
·
Engineering knowledge to assess and
comment and approve others work performed under direct supervision.
·
Professional knowledge of local
buildings codes and safety laws and regulations as well as international
standards.
·
Review development plans for
compliance to engineering standards, policies, or details and ensure full
coordination between all associated trades.
·
Perform engineering supervision
duties surrounding the following; design documents, urban planning, public
works, civil defense, civil aviation, compounds, hospitalities, recreations,
buildings, sub-divisions, traffic, road, airport, tunnel, facades, interiors,
finishes, transport systems, green features and environmental systems.
·
Coordinate the activities of the
design and construction supervision teams as and when required during the
construction stages.
·
Review and comment on contractor
presented documentation and/or proposed changes to design documents and
coordinate with design team when necessary.
·
Review and comment on contractor
presented project close out documentation.
·
Implement QA/QC procedures as
applicable and approved at the project.
·
Prepare and issue technical reports
as required as well clear daily records and diary entries.
·
Attend meetings, site visits and
inspections and required.
·
Shall ensure that all the materials
submitted for approval are those specified.
·
Will assume responsibility for
on-site activities and ensure, among other things, the proper coordination of
the review of shop drawings, materials submittals, method statement, as-built
drawings etc.
Qualifications
·
Bachelor’s Degree in Civil or
Structural Engineering from a recognized university
·
Minimum of 5-10 years’ experience in
a related field.
·
Must be a valid member of the
Institution of Engineers of Kenya
·
Must be a registered engineer with
Engineers Board of Kenya.
Mechanical Engineer
Reporting
to the Construction Manager
Responsibilities
·
Function as technical coordinator and
supervisor on engineering projects
·
Function as Trade Chief Inspector on
Engineering projects and report findings to superior daily.
·
Professional Engineering knowledge to
interpret, implement, coordinate construction documents, layout, drawings,
technical specifications.
·
Professional knowledge of local
building codes and safety laws and regulations as well as International
standards.
·
Professional Engineers knowledge to
assess and comment and approve others work performed under direct supervisions.
·
Review development plants for
compliance to engineering standards, policies, or details and ensure full
coordination between all associated trades.
·
Perform Engineering supervision
duties surrounding the following; design documents, urban planning, public
works, civil defense, civil aviation, compounds, hospitalities, recreations,
building sub-divisions, traffic, road, airport, tunnel facade, interiors,
finishes, transport system, green features and environmental system.
·
Coordinate the activities of the
design and construction supervision teams as and when required during documents
and coordinates with design team when necessary.
·
Review and comment on contractor
presented documentations and/or proposed changes to design documents and
coordinate with design team when necessary.
·
Review and comments on contractor
presented documentation and/or proposed changes to design documents and
coordinate with design team when necessary.
·
Review and comment on contractor
presented project closeout documentation
·
Implement QA/QC procedure as
applicable and approved at the project.
·
Prepare and issue technical reports
as required as well clear daily records and diary entries
·
Able to coordinate and monitor
architectural and interiors work related to the project. This includes
coordinating and dealing with both, the Site Supervision team as well as the
Contractor, Sub Contractors and other appropriate specialists
Qualifications
·
Bachelor’s Degree in Mechanical
Engineering from a recognized university
·
Minimum of 5-10 years’ experience in
related field work.
·
Must be a valid member of the
Institution of Engineers of Kenya
·
Must be a registered engineer with
Engineers Board of Kenya
Logistics, Equipment & Maintenance
Manager
Reporting
to the Head of Plant & Equipment
Responsibilities
Logistics
·
Plan, define and Implement the
logistics, special logistics (exempted) and track all shipments (air, sea &
road) to ensure on time delivery to sites.
·
Manage all border clearance for all
company assets.
·
Seek exemption approvals for special
logistics from KRA / Government where applicable.
Transport
·
Ensure all site supplies are
delivered on time to support efficient support of projects.
·
Plan site mobilization &
demobilization of company fleet and equipment.
·
To ensure all Internal Service
Charges are raised for each site on time.
·
Ensure all invoices to external
clients are raised on time.
Equipment
·
To track all equipment and report on
their condition status
·
Monitor the performance of all
equipment.
·
Manage and coordinate all equipment
transfers including exports and coordinating with relevant bodies to get
approvals for permanent and temporary export.
·
Coordinate equipment external hire.
·
Coordinate with the workshop
maintenance on status of each equipment.
·
Liaising and negotiating with
different parties, e.g. planning and highways authorities, county government
for facilitation and approvals.
Maintenance Workshop
·
Ensure reliability and availability
of all machinery, equipment and m/vehicles to support business operations
·
Maintain accurate records and logs,
including performing equipment inspections and preventative maintenance.
·
Initiate and drive cost management
initiatives.
·
Ensure availability of resources to
support efficient running of the operations.
·
Ensure a motivated, skilled and
highly productive team
Qualifications
·
Bachelor’s Degree in Business related
field from a recognized university
·
Minimum of 5-10 years’ experience in
a related field
·
Diploma in Project Management will be
an added advantage
·
Proficiency in Computers
How To Apply
Experience
in working in a hydrothermal project will be an added advantage.
Candidates
should submit their applications (indicating the position on the subject head)
including copies of academic and professional certificates, testimonials and
updated detailed CV indicating current position, qualifications, working
experience, names of at least two (2) professional referees, remuneration and
day time telephone to hr@transcentury.co.ke
Applications
should be received no later than Wednesday 27th March, 2019